From the Roastery
Have you ever wondered how a small, green bean becomes the fragrant, brown beans that we grind and brew every morning?
Before coffee reaches your cup, it goes through a remarkable transformation. Green coffee beans have a grassy, almost vegetal smell and very little of the familiar aroma we associate with freshly brewed coffee. That all begins to change when the beans are exposed to heat in a process known as roasting.
In a matter of minutes, their colour, structure, aroma and flavour begin to change, unlocking the complex characteristics that make each coffee unique.
For speciality coffee roasters, roasting is an opportunity to bring out the best in each coffee they work with. As we have learnt throughout this blog series, every coffee has its own characteristics, shaped by factors such as its origin, variety and processing method. The roaster’s job is to work with these characteristics, making careful decisions about heat, time and how the roast progresses to create a balanced and enjoyable cup.
So, what actually happens inside the roaster?
Although every roast is different, the process is often described in the three main phases: drying, the Maillard reaction and development. Each plays an important role in transforming green coffee into the beans we know and love.
Phase One: Drying
Every coffee roast starts with green coffee beans. They look and smell quite different from the brown beans we are used to seeing in our coffee bags.
So, how do they get from one to the other?
Green coffee beans naturally contain moisture. When they enter the roaster, heat begins to warm them, causing some of this moisture to evaporate.
This first stage is known as the drying phase. As the beans heat up, their colour and aroma gradually begin to change. They move from green to pale yellow, while their smell shifts from fresh grass towards something more reminiscent of hay or cereal. These are some of the first signs that the beans are beginning to transform.
Every coffee is a little different, so roasters pay close attention to how each batch responds to the heat. Factors such as bean size, density and processing method can all influence how the beans behave during roasting. The aim is to guide the beans through this early stage evenly, preparing them for the chemical reactions that will develop their colour, aroma and flavour as the roast progresses.
Phase Two: The Maillard Reaction
By now, the green coffee beans have warmed up, lost some of their moisture and turned a pale yellow colour. But their transformation is far from over.
As the beans continue to heat up, they begin to turn brown and their aromas become much more familiar. Notes reminiscent of roasted nuts, biscuits and toast start to emerge.
This is where the Maillard reaction plays an important role.
What is the Maillard reaction?
The Maillard reaction is a chemical reaction that occurs when certain sugars react with amino compounds in the presence of heat. It’s responsible for much of the browning and flavour development we see in foods such as toasted bread.
Think about the difference between a slice of soft, pale bread and a piece of golden-brown toast. The heat creates new colours, aromas and flavours that weren’t there before.
Something similar happens during coffee roasting. As the beans heat up, the Maillard reaction contributes to the development of many of the complex aromas and flavours that make roasted coffee so interesting.
The beans gradually change from yellow to tan and then to brown, while their aromas become increasingly sweet, nutty and toasty. These changes help lay the foundations for the flavour and character of the finished coffee.
As the roast continues, these changes become more pronounced. Eventually, the beans reach an important milestone that the roaster listens out for: first crack.
First Crack: A Turning Point
If you were standing inside a roastery, one of the things you might hear during a roast is a series of small popping sounds, similar to popcorn.
This is known as first crack. As the beans heat up, pressure builds inside their cellular structure as water vapour and gases are produced. Eventually, this pressure causes the structure of the beans to fracture, creating the characteristic cracking sound.
First crack is an important milestone for roasters because it signals the beginning of the development phase.
But what does this mean for the coffee?
Phase Three: Development
Once first crack begins, the beans are well on their way to becoming the final product. However, the roast isn’t necessarily finished.
The development phase is the period between first crack and the moment the roaster removes the beans from the heat. During this time, the beans continue to undergo chemical and physical changes, further shaping their aroma, flavour and overall character.
This is where the roaster will make some important decisions.
How long should the beans continue roasting? How much heat should they receive? And when is the right moment to stop?
There isn’t one answer that works for every coffee. Each bean responds differently to heat, and the roaster must consider the characteristics of the green coffee alongside the flavour profile that they are aiming to achieve.
Roast for too little time after the first crack, and the coffee may taste undeveloped, with sour or unbalanced acidity and grassy, cereal-like notes. Push the roast too far, however, and bitterness and smoky flavours can begin to dominate.
The aim isn’t simply to roast for longer or shorter, but to find the point at which the coffee expresses its qualities in the most enjoyable way. The roaster must balance the heat applied to the beans with the changes taking place inside them, making adjustments to suit each coffee rather than following a one-size-fits-all approach. Even small changes can influence how the coffee tastes once brewed.
Cooling the Beans
Once the roaster decides the beans have reached the desired roast level, they are quickly removed from the heat and cooled. This is an important final step because the beans retain heat after leaving the roaster, and residual heat can continue to affect their development.
Roasters typically use a cooling tray, where the beans are spread out and cooled rapidly, often with the help of fans that draw air through them. This helps bring the roasting process to a stop and preserve the flavour profile the roaster has worked to achieve.
Although roasting itself may take only a matter of minutes, cooling is an important part of achieving a consistent result.
Light, Medium and Dark Roasts: What is the difference?
One of the most familiar ways of describing coffee is by its roast level. You will often see coffees labelled as light, medium or dark roast, but what do these terms actually mean?
In simple terms, they describe how far the roasting process has progressed. As roasting continues, the beans generally become darker in colour, and their structure and flavour also continue to change.
Light roasts are often used to highlight distinctive characteristics of a coffee, such as its origin, variety and processing method. Depending on the coffee, you might find bright citrus notes, floral notes or flavours reminiscent of berries and other fruits.
Medium roasts tend to offer a balance between the coffees own characteristic’s and flavours naturally developed during roasting. You might notice sweetness, chocolate, nuts or caramel alongside some of the coffee’s original fruitiness or acidity.
Dark roasts generally have more pronounced roast-driven flavours, such as toasted nuts, dark chocolate, smoke or bittersweet notes. As roasting progresses, the coffees original characteristic’s can become less prominent.
These are useful guidelines rather than strict rules. Two coffees roasted to a similar colour can taste very different, and roast labels aren’t always used consistently between roasters.
It is worth remembering that darker doesn’t automatically mean stronger or better, just as lighter doesn’t automatically mean more acidic or more complex. The best roast is the one that brings out the qualities the roaster wants and that you most enjoy drinking.

What Makes a Good Roast?
Roasting isn’t simply about following a set of steps or reaching a particular colour. It’s about understanding how a coffee is going to respond to heat and making decisions that bring out its best qualities.
A roaster may spend time experimenting with different approaches, tasting the results and making small adjustments until they find a profile that works well for that particular coffee. The same approach won’t necessarily work for every bean, which is part of what makes roasting such a fascinating craft.
Ultimately, roasting is about finding the right balance. Too little or too much development can affect the final cup, and even small changes can influence the way a coffee tastes.
The next time you open a bag of speciality coffee, take a moment to think about the journey those beans have been on. Behind their colour, aroma and flavour are a series of carefully considered decisions, all made to bring out the best in the coffee.
From a small, green bean to the coffee in your cup, roasting is where much of that transformation takes place.
By Hayley Chillfox, Roastery Operator